Spin Flash Dryer Machine

What is the Spin Flash Dryer

Machine Video Link: https://youtu.be/vNh1w6YA8pg

Spin Flash Dryer Machine is continuous drying equipment specially designed for shaped cake, cream paste, paste slurry materials. Clean heat medium goes into the drying room from the tangent direction, form a strong rotary vortex air current together with mechanical mixer. Wet material has been added to the drying room in a fix quantity, and stir in the vortex of air currents were crushed under dry. Drying room at the top with particle size classification, the fine powder discharged from the top of the tower from the back of the separator to collect the product into larger particles return to the drying room, continue to be crushed, and dry.

Model	XSG-4	XSG-6	XSG-8	XSG-10	XSG-12	XSG-16	XSG-20
ID of main machine,mm	400	600	800	1000	1200	1600	2000
Air amount, M3/h	1150-2000	2450-4500	4450-7550	7000-12500	10000-20000	18000-36000	28200-56500
Evaporated moisture, kg/h	40-70	80-150	150-250	230-4250	300-600	600-1000	1000-1500
Max equipped capacity,kw	20	40	65	85	105	150	230
Max,height,m	4.8	5.8	6.5	7.1	7.8	8.8	10.1
Occupied area ,m2	20	28	35	40	52	80	150
Note: 1.The evaporated amount of moisture is calculated when the temperature of inlet is 180℃,and the temperature of outlet is 80oC 2.Besides the models above mentioned,special specification can also be made as request; 3.The equipped capacity above mentioned is standard.The power can also be decreased in accordance with actual condition.

Work Principle

The hot air enters into the bottom of the dryer in tangent direction. Under the driving of the stirrer, a powerful rotating wind area is formed. The paste state materials enter into the dryer through the s crew charger. Under the powerful function effect of stirring at high-speed roation, the materials are distributed under the function of s trike, friction and shearing force. The block state materials will soon be smashed and contact the hot air fully and the materials are heated and dried. The dried materials after the de-watering will go up with the hot-air flow. The grading rings will stop and keep the big particles. Small particles will be discharged out of the dryer from the ring center and will be collected in the cyclone and dust collector. The not-fully-dried or big piece materials will be sent to the wall of the equipment by centrifugal force and be smashed again after they fall down to the bottom .

Spin Flash Dryer MAIN FEATURE

Drying viscous materials: The lower part of the drier is cone structure with a broken device together with the washing of wall by the air flow, which can handle a certain viscous materials. According to different materials, the feeder and discharger can take different forms, can be achieved the requirements of automatic and continuous feeding and smooth out of the material.

Drying heat-sensitive materials: Due to the short drying time, the relative speed of the materials and the hot air is large, and the hottest air not direct contact with the dried material. It can be used to deal with heat-sensitive materials.

Drying strength: The materials in the drying process have been broken, scoured, impacted, that increasing the surface area. At the same time, the hottest air hasn’t direct contact with the dried materials; therefore the inlet temperature can be higher than the melting point of materials. The higher of the inlet temperature equal to the more intensity of the drying equipment.

Effective controlling of the moisture and end fineness of the materials: Through the inside settings of the drier (swirl films, elutriate ring or screener), and coordinating with the inlet air temperature, can effectively controlled the moisture and end fineness of the materials.

Reaching the environmental standards: The system is operated under micro-negative pressure and according to different materials using different dust removal process and materials (pulse bag filter, wet scrubber, venturi scrubber, etc.), can eliminate the environmental pollution.

The best power matching: According to the material properties (density, bulk density, viscosity, fineness, original moisture content, residual moisture content, angle of repose, etc.), matching fans, blender, feeder, etc, so that matching the best power.

Product Details

Spin Flash Dryer KEY APLLICATION

Inorganic: cryolite, ultra-fine calcium carbonate, tellurium dioxide, manganese dioxide, sodium fluoride, kaolin, zirconium silicate, aluminum silicate, basic magnesium carbonate, salt, borax, sodium sulfate, precipitated calcium carbonate , magnesium hydroxide, aluminum phosphate, zinc phosphate, sodium thiosulfate, zinc sulfide, sulfate, cuprous chloride, calcium hypochlorite, boric acid, borax, hydroxide, light magnesium carbonate, the three basic sulfate lead, iron oxide, quartz sand, titanium dioxide, iron oxide red, antimony oxide.

Organic: 1-amino-anthraquinone, benzoic acid, sodium oxalate, long-chain dicarboxylic acid, lead acetate, hydroquinone, anthraquinone, sodium dichloroisocyanurate, Calcium Pantothenate, cyclohexanone, 2 inter-stupid A nitrile, o-methyl benzoic acid, calcium citrate, sodium trichloroisocyanuric acid, sodium salicylate, 2,3 - Acid, DSD Acid, H Acid, J Acid, R Acid, T acid, Y acid , acetanilide.

Polymers: PE, powdered styrene-butadiene rubber, sulfonated phenolic resins, polyvinyl chloride resins, polyvinyl acetate.

Dyes and Pigments: indigo, lead chromate, strontium chromate, reactive red X-3B, Reactive Brilliant Blue KN-R, Li Saul red, yellow alkaline, medium black, lemon yellow, acid black 10B, Mordant black T, phthalocyanine blue, iron oxide black, iron oxide yellow, Cationic Red GTL, Cationic Blue X-GRRL, direct freeze yellow G, a neutral black.

Medicine: Amidopyrine, protein powder, nucleotide, guanosine.

Pesticides: atrazine, Abamectin, Bataan, chlorothalonil, mefenacet pyridaben, imidacloprid, glyphosate, mancozeb, paclobutrazol, fenoxaprop, quizalofop-P-ethyl, methomyl, Dan sterilization, insecticide Dan, monosultap, Bisultap, triphenyltin acetate, mites sweep net, Tricyclazole, double Gan phosphine, imposed music.

Chemical Agents: white carbon black, to promote the agent D, accelerator TMTD, molecular sieve, activated clay, TBSI CZ, TBSI DM, TBSI M, TBSI TMTD, TBSI ZDC, phosphate Dibasic Lead acid, stearic acid salt.

Food and feed additives: Soy Protein Isolate, methionine chelate copper, starch, yeast powder, glucose.

Our Services

24 hours per day,365 days per year online service

Enquiry will be replied in 2 hours

One year warranty

OEM & ODM are available

Free spare parts for any breakdown under convincing eviden

About Us

Billicom is a group company specializing in dehydration treatment of various industrial materials, headquartered in Changzhou City, Jiangsu Province, with business in more than 20 countries and regions, selling products to customers all over the world. We are committed to innovative design and manufacturing, providing and serving high-value equipment solutions for industrial customers.

We provide customers with a wide range of industrial process solutions for material dehydration, including dryers, filtration equipment, evaporators, mixers, granulation equipment, packaging equipment, pumps, weighing equipment and heat exchangers. Our products serve global customers in chemical, food, pharmaceutical, mining, general industry and sludge treatment markets.

We are a manufacturer and after-sales service provider of highly engineered products and process solutions, which are widely used in various industrial manufacturing industries, including pumps, rotary valves, atomizers and industrial control systems. To provide high-quality, competitive price products and services to global customers.

FAQ

Q:Are you manufacturer or trading company?

A:We are group company 20 years experience professional manufacturer of drying machine,mixing machine,granulating machine.And we also have 20 years experience for exporting machines.

Q:Where is your factory located?

A:The factory located in Changzhou City,Jiangsu Province,near in Shanghai.Form Shanghai Pudong airprot to the factory is about 260Km,it need about 3 hours by car.

Q:If can make a testing in your factory?

A:Sure,our factory have Spray Dryer Machine for testing, you can take 10~50kgs raw material to our factory for testing.

Q:How Can I select the right Spray dryer Machine ?

A:We will help you choose the right type and model for Spray dryer Machine, by knowing the following information:

Liquid name and property: Solid contents(or water contents), viscosity , surface　tension and PH value.

Dried powder density residual water contents allowed, particle size, and maximum temperature allowed.

Output capacity: shift time daily .

Energy that can be supplied: steam pressure, electricity properly , fuel of coal, oil　and natural gas .

Control requirement: whether or not the inlet and outlet temperatures should be controlled.PLC or button type,electric component brand require.

Powder collection requirement: whether it’s necessary to use cloth bag filter and the requirement of the environment of the exhausted gas .

Other special requirements.

Contact Us

BILLICOM GROUP CO.,LTD

ADD: RM28-5,Changhong Jiayuan,Hutang Town,Wujin,Changzhou city,China

Tel : +86-519-89821556

Fax: +86-519-89821556

E-mail:info@billicomgroup.com

Whatsapp: +86-13961187595